public interface FencedLock extends Lock, DistributedObject
Lock
.
FencedLock
is accessed via CPSubsystem.getLock(String)
.
FencedLock
is CP with respect to the CAP principle. It works on top
of the Raft consensus algorithm. It offers linearizability during crash-stop
failures and network partitions. If a network partition occurs, it remains
available on at most one side of the partition.
FencedLock
works on top of CP sessions. Please see CPSession
for more information about CP sessions.
By default, FencedLock
is reentrant. Once a caller acquires
the lock, it can acquire the lock reentrantly as many times as it wants
in a linearizable manner. You can configure the reentrancy behaviour via
FencedLockConfig
. For instance, reentrancy can be disabled and
FencedLock
can work as a non-reentrant mutex. One can also set
a custom reentrancy limit. When the reentrancy limit is reached,
FencedLock
does not block a lock call. Instead, it fails with
LockAcquireLimitReachedException
or a specified return value.
Please check the locking methods to see details about the behaviour.
Distributed locks are unfortunately NOT EQUIVALENT to single-node mutexes
because of the complexities in distributed systems, such as uncertain
communication patterns, and independent and partial failures.
In an asynchronous network, no lock service can guarantee mutual exclusion,
because there is no way to distinguish between a slow and a crashed process.
Consider the following scenario, where a Hazelcast client acquires
a FencedLock
, then hits a long GC pause. Since it will not be able
to commit session heartbeats while paused, its CP session will be eventually
closed. After this moment, another Hazelcast client can acquire this lock.
If the first client wakes up again, it may not immediately notice that it
has lost ownership of the lock. In this case, multiple clients think they
hold the lock. If they attempt to perform an operation on a shared resource,
they can break the system. To prevent such situations, you can choose to use
an infinite session timeout, but this time probably you are going to deal
with liveliness issues. For the scenario above, even if the first client
actually crashes, requests sent by 2 clients can be re-ordered in the network
and hit the external resource in reverse order.
There is a simple solution for this problem. Lock holders are ordered by a monotonic fencing token, which increments each time the lock is assigned to a new owner. This fencing token can be passed to external services or resources to ensure sequential execution of side effects performed by lock holders.
The following figure illustrates the idea. Client-1 acquires the lock first and receives 1 as its fencing token. Then, it passes this token to the external service, which is our shared resource in this scenario. Just after that, Client-1 hits a long GC pause and eventually loses ownership of the lock because it misses to commit CP session heartbeats. Then, Client-2 chimes in and acquires the lock. Similar to Client-1, Client-2 passes its fencing token to the external service. After that, once Client-1 comes back alive, its write request will be rejected by the external service, and only Client-2 will be able to safely talk it.
CLIENT-1's session is expired. | |------------------| LOCK is acquired by CLIENT-1. | LOCK is acquired by CLIENT-2. | LOCK | . . . . . . . - - - - - - - - - - - - - - - - | . . + + + + + + + + + + + + + + + + + + + + + + + + + + + |------------------| /\ \ fence = 1 | /| \ fence = 2 / \ / \ |------------------| / \ | / \ | CLIENT-1 wakes up. | CLIENT-1 | . . . . ./. . . . \/. . .|_ _ _ _ _ _ _ _ _ _ /_ _ _ _ \ _ _ _ _|. . . . . . . . . . . . . . . . . . . . |------------------| lock() \ CLIENT-1 is paused. / \ write(A) \ set_fence(1) \ / \ \ |------------------| \ / \ \ | CLIENT-2 | . . . . . . . . . . . . \ . . . . . . . . ./. . . . . . . . \/. . . . . . \ . . . . . . . . . . . . . . . |------------------| \ lock() \ \ write(B) \ \ set_fence(2) \ \ \ |------------------| \ | \ | \ \ | EXTERNAL SERVICE | . . . . . . . . . . . . . . \/ |- - - - - - - - - - - - - - - - - \/ |+ + + + \/ + + + + + + \/ + + + + |------------------| | | write(A) fails. write(B) ok. | SERVICE belongs to CLIENT-1. | SERVICE belongs to CLIENT-2.You can read more about the fencing token idea in Martin Kleppmann's "How to do distributed locking" blog post and Google's Chubby paper.
FencedLock
integrates this idea with the Lock
abstraction.
All of the API methods in the new FencedLock
abstraction offer
exactly-once execution semantics. For instance, even if a lock()
call is internally retried because of a crashed CP member, the lock is
acquired only once. The same rule also applies to the other methods
in the API.
Modifier and Type | Field and Description |
---|---|
static long |
INVALID_FENCE
Representation of a failed lock attempt where
the caller thread has not acquired the lock
|
Modifier and Type | Method and Description |
---|---|
long |
getFence()
Returns the fencing token if the lock is held by the current thread.
|
CPGroupId |
getGroupId()
Returns id of the CP group that runs this
FencedLock instance |
int |
getLockCount()
Returns the reentrant lock count if the lock is held by any thread
in the cluster.
|
boolean |
isLocked()
Returns whether this lock is locked or not.
|
boolean |
isLockedByCurrentThread()
Returns whether the lock is held by the current thread or not.
|
void |
lock()
Acquires the lock.
|
long |
lockAndGetFence()
Acquires the lock and returns the fencing token assigned to the current
thread for this lock acquire.
|
void |
lockInterruptibly()
Acquires the lock unless the current thread is
interrupted.
|
Condition |
newCondition()
NOT IMPLEMENTED.
|
boolean |
tryLock()
Acquires the lock if it is available or already held by the current
thread at the time of invocation & the acquire limit is not exceeded,
and immediately returns with the value
true . |
boolean |
tryLock(long time,
TimeUnit unit)
Acquires the lock if it is free within the given waiting time,
or already held by the current thread.
|
long |
tryLockAndGetFence()
Acquires the lock only if it is free or already held by the current
thread at the time of invocation & the acquire limit is not exceeded,
and returns the fencing token assigned to the current thread for this
lock acquire.
|
long |
tryLockAndGetFence(long time,
TimeUnit unit)
Acquires the lock if it is free within the given waiting time,
or already held by the current thread at the time of invocation &
the acquire limit is not exceeded, and returns the fencing token
assigned to the current thread for this lock acquire.
|
void |
unlock()
Releases the lock if the lock is currently held by the current thread.
|
destroy, getName, getPartitionKey, getServiceName
static final long INVALID_FENCE
void lock()
When the caller already holds the lock and the current lock() call is
reentrant, the call can fail with
LockAcquireLimitReachedException
if the lock acquire limit is
already reached. Please see FencedLockConfig
for more
information.
If the lock is not available then the current thread becomes disabled for thread scheduling purposes and lies dormant until the lock has been acquired.
Consider the following scenario:
FencedLock lock = ...; lock.lock(); // JVM of the caller thread hits a long pause // and its CP session is closed on the CP group. lock.lock();In this scenario, a thread acquires the lock, then its JVM instance encounters a long pause, which is longer than
CPSubsystemConfig.getSessionTimeToLiveSeconds()
. In this case,
its CP session will be closed on the corresponding CP group because
it could not commit session heartbeats in the meantime. After the JVM
instance wakes up again, the same thread attempts to acquire the lock
reentrantly. In this case, the second lock() call fails by throwing
LockOwnershipLostException
which extends
IllegalMonitorStateException
. If the caller wants to deal with
its session loss by taking some custom actions, it can handle the thrown
LockOwnershipLostException
instance. Otherwise, it can treat it
as a regular IllegalMonitorStateException
.lock
in interface Lock
LockOwnershipLostException
- if the underlying CP session is
closed while locking reentrantlyLockAcquireLimitReachedException
- if the lock call is reentrant
and the configured lock acquire limit is already reached.void lockInterruptibly() throws InterruptedException
When the caller already holds the lock and the current lock() call is
reentrant, the call can fail with
LockAcquireLimitReachedException
if the lock acquire limit is
already reached. Please see FencedLockConfig
for more
information.
If the lock is not available then the current thread becomes disabled for thread scheduling purposes and lies dormant until the lock has been acquired. Interruption may not be possible after the lock request arrives to the CP group, if the proxy does not attempt to retry its lock request because of a failure in the system.
Please note that even if InterruptedException
is thrown,
the lock may be acquired on the CP group.
When InterruptedException
is thrown, the current thread's
interrupted status is cleared.
Consider the following scenario:
FencedLock lock = ...; lock.lockInterruptibly(); // JVM of the caller thread hits a long pause // and its CP session is closed on the CP group. lock.lockInterruptibly();In this scenario, a thread acquires the lock, then its JVM instance encounters a long pause, which is longer than
CPSubsystemConfig.getSessionTimeToLiveSeconds()
. In this case,
its CP session will be closed on the corresponding CP group because
it could not commit session heartbeats in the meantime. After the JVM
instance wakes up again, the same thread attempts to acquire the lock
reentrantly. In this case, the second lock() call fails by throwing
LockOwnershipLostException
which extends
IllegalMonitorStateException
. If the caller wants to deal with
its session loss by taking some custom actions, it can handle the thrown
LockOwnershipLostException
instance. Otherwise, it can treat it
as a regular IllegalMonitorStateException
.lockInterruptibly
in interface Lock
InterruptedException
- if the current thread is interrupted while
acquiring the lock.LockOwnershipLostException
- if the underlying CP session is
closed while locking reentrantlyLockAcquireLimitReachedException
- if the lock call is reentrant
and the configured lock acquire limit is already reached.long lockAndGetFence()
LockAcquireLimitReachedException
if the lock acquire limit is
already reached. Please see FencedLockConfig
for more
information.
If the lock is not available then the current thread becomes disabled for thread scheduling purposes and lies dormant until the lock has been acquired.
This is a convenience method for the following pattern:
FencedLock lock = ...; lock.lock(); return lock.getFence();
Consider the following scenario where the lock is free initially:
FencedLock lock = ...; // the lock is free lock.lockAndGetFence(); // JVM of the caller thread hits a long pause // and its CP session is closed on the CP group. lock.lockAndGetFence();In this scenario, a thread acquires the lock, then its JVM instance encounters a long pause, which is longer than
CPSubsystemConfig.getSessionTimeToLiveSeconds()
. In this case,
its CP session will be closed on the corresponding CP group because
it could not commit session heartbeats in the meantime. After the JVM
instance wakes up again, the same thread attempts to acquire the lock
reentrantly. In this case, the second lock() call fails by throwing
LockOwnershipLostException
which extends
IllegalMonitorStateException
. If the caller wants to deal with
its session loss by taking some custom actions, it can handle the thrown
LockOwnershipLostException
instance. Otherwise, it can treat it
as a regular IllegalMonitorStateException
.
Fencing tokens are monotonic numbers that are incremented each time the lock switches from the free state to the acquired state. They are simply used for ordering lock holders. A lock holder can pass its fencing to the shared resource to fence off previous lock holders. When this resource receives an operation, it can validate the fencing token in the operation.
Consider the following scenario where the lock is free initially:
FencedLock lock = ...; // the lock is free long fence1 = lock.lockAndGetFence(); // (1) long fence2 = lock.lockAndGetFence(); // (2) assert fence1 == fence2; lock.unlock(); lock.unlock(); long fence3 = lock.lockAndGetFence(); // (3) assert fence3 > fence1;In this scenario, the lock is acquired by a thread in the cluster. Then, the same thread reentrantly acquires the lock again. The fencing token returned from the second acquire is equal to the one returned from the first acquire, because of reentrancy. After the second acquire, the lock is released 2 times, hence becomes free. There is a third lock acquire here, which returns a new fencing token. Because this last lock acquire is not reentrant, its fencing token is guaranteed to be larger than the previous tokens, independent of the thread that has acquired the lock.
LockOwnershipLostException
- if the underlying CP session is
closed while locking reentrantlyLockAcquireLimitReachedException
- if the lock call is reentrant
and the configured lock acquire limit is already reached.boolean tryLock()
true
. If the lock is not
available, then this method immediately returns with the value
false
. When the call is reentrant, it can return false
if the lock acquire limit is exceeded. Please see
FencedLockConfig
for more information.
A typical usage idiom for this method would be:
FencedLock lock = ...; if (lock.tryLock()) { try { // manipulate protected state } finally { lock.unlock(); } } else { // perform alternative actions }This usage ensures that the lock is unlocked if it was acquired, and doesn't try to unlock if the lock was not acquired.
tryLock
in interface Lock
true
if the lock was acquired and
false
otherwiseLockOwnershipLostException
- if the underlying CP session is
closed while locking reentrantlylong tryLockAndGetFence()
INVALID_FENCE
that represents a failed lock attempt.
Please see FencedLockConfig
for more information.
This is a convenience method for the following pattern:
FencedLock lock = ...; if (lock.tryLock()) { return lock.getFence(); } else { return FencedLock.INVALID_FENCE; }
Consider the following scenario where the lock is free initially:
FencedLock lock = ...; // the lock is free lock.tryLockAndGetFence(); // JVM of the caller thread hits a long pause // and its CP session is closed on the CP group. lock.tryLockAndGetFence();In this scenario, a thread acquires the lock, then its JVM instance encounters a long pause, which is longer than
CPSubsystemConfig.getSessionTimeToLiveSeconds()
. In this case,
its CP session will be closed on the corresponding CP group because
it could not commit session heartbeats in the meantime. After the JVM
instance wakes up again, the same thread attempts to acquire the lock
reentrantly. In this case, the second lock() call fails by throwing
LockOwnershipLostException
which extends
IllegalMonitorStateException
. If the caller wants to deal with
its session loss by taking some custom actions, it can handle the thrown
LockOwnershipLostException
instance. Otherwise, it can treat it
as a regular IllegalMonitorStateException
.
Fencing tokens are monotonic numbers that are incremented each time the lock switches from the free state to the acquired state. They are simply used for ordering lock holders. A lock holder can pass its fencing to the shared resource to fence off previous lock holders. When this resource receives an operation, it can validate the fencing token in the operation.
Consider the following scenario where the lock is free initially:
FencedLock lock = ...; // the lock is free long fence1 = lock.tryLockAndGetFence(); // (1) long fence2 = lock.tryLockAndGetFence(); // (2) assert fence1 == fence2; lock.unlock(); lock.unlock(); long fence3 = lock.tryLockAndGetFence(); // (3) assert fence3 > fence1;In this scenario, the lock is acquired by a thread in the cluster. Then, the same thread reentrantly acquires the lock again. The fencing token returned from the second acquire is equal to the one returned from the first acquire, because of reentrancy. After the second acquire, the lock is released 2 times, hence becomes free. There is a third lock acquire here, which returns a new fencing token. Because this last lock acquire is not reentrant, its fencing token is guaranteed to be larger than the previous tokens, independent of the thread that has acquired the lock.
INVALID_FENCE
otherwiseLockOwnershipLostException
- if the underlying CP session is
closed while locking reentrantlyboolean tryLock(long time, TimeUnit unit)
If the lock is available, this method returns immediately with the value
true
. When the call is reentrant, it immediately returns
true
if the lock acquire limit is not exceeded. Otherwise,
it returns false
on the reentrant lock attempt if the acquire
limit is exceeded. Please see FencedLockConfig
for more
information.
If the lock is not available then the current thread becomes disabled for thread scheduling purposes and lies dormant until the lock is acquired by the current thread or the specified waiting time elapses.
If the lock is acquired, then the value true
is returned.
If the specified waiting time elapses, then the value false
is returned. If the time is less than or equal to zero, the method does
not wait at all.
tryLock
in interface Lock
time
- the maximum time to wait for the lockunit
- the time unit of the time
argumenttrue
if the lock was acquired and false
if the waiting time elapsed before the lock was acquiredLockOwnershipLostException
- if the underlying CP session is
closed while locking reentrantlylong tryLockAndGetFence(long time, TimeUnit unit)
INVALID_FENCE
that represents a failed lock attempt.
Please see FencedLockConfig
for more information.
If the lock is not available then the current thread becomes disabled for thread scheduling purposes and lies dormant until the lock is acquired by the current thread or the specified waiting time elapses.
If the specified waiting time elapses, then INVALID_FENCE
is returned. If the time is less than or equal to zero, the method does
not wait at all.
This is a convenience method for the following pattern:
FencedLock lock = ...; if (lock.tryLock(time, unit)) { return lock.getFence(); } else { return FencedLock.INVALID_FENCE; }
Consider the following scenario where the lock is free initially:
FencedLock lock = ...; // the lock is free lock.tryLockAndGetFence(time, unit); // JVM of the caller thread hits a long pause and its CP session is closed on the CP group. lock.tryLockAndGetFence(time, unit);In this scenario, a thread acquires the lock, then its JVM instance encounters a long pause, which is longer than
CPSubsystemConfig.getSessionTimeToLiveSeconds()
. In this case,
its CP session will be closed on the corresponding CP group because
it could not commit session heartbeats in the meantime. After the JVM
instance wakes up again, the same thread attempts to acquire the lock
reentrantly. In this case, the second lock() call fails by throwing
LockOwnershipLostException
which extends
IllegalMonitorStateException
. If the caller wants to deal with
its session loss by taking some custom actions, it can handle the thrown
LockOwnershipLostException
instance. Otherwise, it can treat it
as a regular IllegalMonitorStateException
.
Fencing tokens are monotonic numbers that are incremented each time the lock switches from the free state to the acquired state. They are simply used for ordering lock holders. A lock holder can pass its fencing to the shared resource to fence off previous lock holders. When this resource receives an operation, it can validate the fencing token in the operation.
Consider the following scenario where the lock is free initially:
FencedLock lock = ...; // the lock is free long fence1 = lock.tryLockAndGetFence(time, unit); // (1) long fence2 = lock.tryLockAndGetFence(time, unit); // (2) assert fence1 == fence2; lock.unlock(); lock.unlock(); long fence3 = lock.tryLockAndGetFence(time, unit); // (3) assert fence3 > fence1;In this scenario, the lock is acquired by a thread in the cluster. Then, the same thread reentrantly acquires the lock again. The fencing token returned from the second acquire is equal to the one returned from the first acquire, because of reentrancy. After the second acquire, the lock is released 2 times, hence becomes free. There is a third lock acquire here, which returns a new fencing token. Because this last lock acquire is not reentrant, its fencing token is guaranteed to be larger than the previous tokens, independent of the thread that has acquired the lock.
time
- the maximum time to wait for the lockunit
- the time unit of the time
argumentINVALID_FENCE
otherwiseLockOwnershipLostException
- if the underlying CP session is
closed while locking reentrantlyvoid unlock()
unlock
in interface Lock
IllegalMonitorStateException
- if the lock is not held by
the current threadLockOwnershipLostException
- if the underlying CP session is
closed before the current thread releases the locklong getFence()
Fencing tokens are monotonic numbers that are incremented each time the lock switches from the free state to the acquired state. They are simply used for ordering lock holders. A lock holder can pass its fencing to the shared resource to fence off previous lock holders. When this resource receives an operation, it can validate the fencing token in the operation.
IllegalMonitorStateException
- if the lock is not held by
the current threadLockOwnershipLostException
- if the underlying CP session is
closed while the current thread is holding the lockboolean isLocked()
true
if this lock is locked by any thread
in the cluster, false
otherwise.LockOwnershipLostException
- if the underlying CP session is
closed while the current thread is holding the lockboolean isLockedByCurrentThread()
true
if the lock is held by the current thread or not,
false
otherwise.LockOwnershipLostException
- if the underlying CP session is
closed while the current thread is holding the lockint getLockCount()
LockOwnershipLostException
- if the underlying CP session is
closed while the current thread is holding the lockCPGroupId getGroupId()
FencedLock
instanceFencedLock
instanceCondition newCondition()
UnsupportedOperationException
.
May the force be the one who dares to implement
a linearizable distributed Condition
:)
newCondition
in interface Lock
UnsupportedOperationException
- for nowCopyright © 2021 Hazelcast, Inc.. All rights reserved.