Package | Description |
---|---|
com.hazelcast.client.properties |
Contains the Hazelcast client properties implementation.
|
com.hazelcast.jet.cdc |
Contains source/sink connectors that deal with Change Data Capture (CDC)
events from various databases as well as a generic connector for Debezium
CDC sources.
|
com.hazelcast.jet.grpc |
Contributes
gRPC service factories that can be to apply transformations to
a pipeline which for each input item calls to a gRPC service. |
com.hazelcast.spi.properties |
Contains the Hazelcast properties implementation.
|
Modifier and Type | Field and Description |
---|---|
static HazelcastProperty |
ClientProperty.BACKPRESSURE_BACKOFF_TIMEOUT_MILLIS
Control the maximum timeout in millis to wait for an invocation space to be available.
|
static HazelcastProperty |
ClientProperty.CONCURRENT_WINDOW_MS
Property needed for concurrency detection so that write through and dynamic response handling
can be done correctly.
|
static HazelcastProperty |
ClientProperty.DISCOVERY_SPI_ENABLED
Enables the Discovery SPI
|
static HazelcastProperty |
ClientProperty.DISCOVERY_SPI_PUBLIC_IP_ENABLED
Enables the Discovery Joiner to use public IP from DiscoveredNode.
|
static HazelcastProperty |
ClientProperty.EVENT_QUEUE_CAPACITY
Capacity of the executor that handles the incoming event packets.
|
static HazelcastProperty |
ClientProperty.EVENT_THREAD_COUNT
Number of the threads to handle the incoming event packets.
|
static HazelcastProperty |
ClientProperty.FAIL_ON_INDETERMINATE_OPERATION_STATE
When this configuration is enabled, if an operation has sync backups and acks are not received from backup replicas
in time, or the member which owns primary replica of the target partition leaves the cluster, then the invocation fails
with
IndeterminateOperationStateException . |
static HazelcastProperty |
ClientProperty.HAZELCAST_CLOUD_DISCOVERY_TOKEN
Token to use when discovering cluster via hazelcast.cloud
|
static HazelcastProperty |
ClientProperty.HEARTBEAT_INTERVAL
Time interval between the heartbeats sent by the client to the nodes.
|
static HazelcastProperty |
ClientProperty.HEARTBEAT_TIMEOUT
Client sends heartbeat messages to the members and this is the timeout for this sending operations.
|
static HazelcastProperty |
ClientProperty.INVOCATION_RETRY_PAUSE_MILLIS
Pause time between each retry cycle of an invocation in milliseconds.
|
static HazelcastProperty |
ClientProperty.INVOCATION_TIMEOUT_SECONDS
When an invocation gets an exception because :
- Member throws an exception.
|
static HazelcastProperty |
ClientProperty.IO_BALANCER_INTERVAL_SECONDS
The interval in seconds between
IOBalancer
executions. |
static HazelcastProperty |
ClientProperty.IO_INPUT_THREAD_COUNT
Controls the number of IO input threads.
|
static HazelcastProperty |
ClientProperty.IO_OUTPUT_THREAD_COUNT
Controls the number of IO output threads.
|
static HazelcastProperty |
ClientProperty.IO_WRITE_THROUGH_ENABLED
Optimization that allows sending of packets over the network to be done on the calling thread if the
conditions are right.
|
static HazelcastProperty |
ClientProperty.MAX_CONCURRENT_INVOCATIONS
The maximum number of concurrent invocations allowed.
|
static HazelcastProperty |
ClientProperty.METRICS_COLLECTION_FREQUENCY
Sets the metrics collection frequency in seconds.
|
static HazelcastProperty |
ClientProperty.METRICS_DEBUG
Enables collecting debug metrics.
|
static HazelcastProperty |
ClientProperty.METRICS_ENABLED
Enables/disables metrics collection altogether.
|
static HazelcastProperty |
ClientProperty.METRICS_JMX_ENABLED
Enables/disables exposing metrics on JMX.
|
static HazelcastProperty |
ClientProperty.OPERATION_BACKUP_TIMEOUT_MILLIS
If an operation has backups, this property specifies how long the invocation will wait for acks from the backup replicas.
|
static HazelcastProperty |
ClientProperty.RESPONSE_THREAD_COUNT
The number of response threads.
|
static HazelcastProperty |
ClientProperty.RESPONSE_THREAD_DYNAMIC
Enabled dynamic switching between processing responses on the io threads
and offloading the response threads.
|
static HazelcastProperty |
ClientProperty.SHUFFLE_MEMBER_LIST
Client shuffles the given member list to prevent all clients to connect to the same node when
this property is set to true.
|
static HazelcastProperty |
ClientProperty.STATISTICS_ENABLED
Deprecated.
since 4.0. Use
ClientProperty.METRICS_ENABLED
("hazelcast.client.metrics.enabled" ) instead. |
static HazelcastProperty |
ClientProperty.STATISTICS_PERIOD_SECONDS
Deprecated.
since 4.0. Use
ClientProperty.METRICS_COLLECTION_FREQUENCY
("hazelcast.client.metrics.collection.frequency" ) instead. |
Modifier and Type | Field and Description |
---|---|
static HazelcastProperty |
CdcSinks.SEQUENCE_CACHE_EXPIRATION_SECONDS
Number of seconds for which the sink will remember the last seen
sequence number for an input key (used to detect reordering).
|
Modifier and Type | Field and Description |
---|---|
static HazelcastProperty |
GrpcProperties.DESTROY_TIMEOUT
Time to wait for
StreamObserver.onCompleted() confirmation when destroying a
BidirectionalStreamingService
You may want to increase this value when your gRPC calls take longer than 1 s to cleanly shutdown the service. |
static HazelcastProperty |
GrpcProperties.SHUTDOWN_TIMEOUT
Time to wait for clean shutdown of a
ManagedChannel |
Modifier and Type | Field and Description |
---|---|
static HazelcastProperty |
ClusterProperty.AGGREGATION_ACCUMULATION_PARALLEL_EVALUATION
Run aggregation accumulation for multiple entries in parallel.
|
static HazelcastProperty |
ClusterProperty.BACKPRESSURE_BACKOFF_TIMEOUT_MILLIS
Control the maximum timeout in millis to wait for an invocation space to
be available.
|
static HazelcastProperty |
ClusterProperty.BACKPRESSURE_ENABLED
Using back pressure, you can prevent an overload of pending asynchronous
backups.
|
static HazelcastProperty |
ClusterProperty.BACKPRESSURE_MAX_CONCURRENT_INVOCATIONS_PER_PARTITION
The maximum number of concurrent invocations per partition.
|
static HazelcastProperty |
ClusterProperty.BACKPRESSURE_SYNCWINDOW
Controls the frequency of a BackupAwareOperation getting its async backups
converted to a sync backups.
|
static HazelcastProperty |
ClusterProperty.CACHE_INVALIDATION_MESSAGE_BATCH_ENABLED
Defines cache invalidation event batch sending is enabled or not.
|
static HazelcastProperty |
ClusterProperty.CACHE_INVALIDATION_MESSAGE_BATCH_FREQUENCY_SECONDS
Defines the cache invalidation event batch sending frequency in seconds.
|
static HazelcastProperty |
ClusterProperty.CACHE_INVALIDATION_MESSAGE_BATCH_SIZE
Defines the maximum number of cache invalidation events to be drained and
sent to the event listeners in a batch.
|
static HazelcastProperty |
ClusterProperty.CHANNEL_COUNT
Number of parallel connection between members.
|
static HazelcastProperty |
ClusterProperty.CLIENT_CLEANUP_PERIOD
Time period to check if a client is still part of the cluster.
|
static HazelcastProperty |
ClusterProperty.CLIENT_CLEANUP_TIMEOUT
Timeout duration to decide if a client is still part of the cluster.
|
static HazelcastProperty |
ClusterProperty.CLIENT_ENGINE_BLOCKING_THREAD_COUNT
The number of threads that the client engine has available for processing requests that are blocking
(example: related to transactions)
When not set it is set as core-size * 20.
|
static HazelcastProperty |
ClusterProperty.CLIENT_ENGINE_QUERY_THREAD_COUNT
The number of threads that the client engine has available for processing
requests that are related to the query engine.
|
static HazelcastProperty |
ClusterProperty.CLIENT_ENGINE_THREAD_COUNT
The number of threads that the client engine has available for processing
requests that are not partition specific.
|
static HazelcastProperty |
ClusterProperty.CLIENT_HEARTBEAT_TIMEOUT_SECONDS
Time after which the member assumes the client is dead and closes its
connections to the client.
|
static HazelcastProperty |
ClusterProperty.CLIENT_PROTOCOL_UNVERIFIED_MESSAGE_BYTES
Client protocol message size limit (in bytes) for unverified connections
(i.e.
|
static HazelcastProperty |
ClusterProperty.CLUSTER_SHUTDOWN_TIMEOUT_SECONDS
Once a member initiates cluster shutdown, it will either wait for all
members to leave the cluster before shutting itself down.
|
static HazelcastProperty |
ClusterProperty.CONCURRENT_WINDOW_MS
Property needed for concurrency detection so that write through can be
done correctly.
|
static HazelcastProperty |
ClusterProperty.CONNECT_ALL_WAIT_SECONDS
Timeout to connect all other cluster members when a member is joining to a cluster.
|
static HazelcastProperty |
ClusterProperty.CONNECTION_MONITOR_INTERVAL
Minimum interval in milliseconds to consider a connection error as critical.
|
static HazelcastProperty |
ClusterProperty.CONNECTION_MONITOR_MAX_FAULTS
Maximum I/O error count before disconnecting from a member.
|
static HazelcastProperty |
ClusterProperty.DISABLE_STALE_READ_ON_PARTITION_MIGRATION
Hazelcast allows read operations to be performed while a partition is
being migrated.
|
static HazelcastProperty |
ClusterProperty.DISCOVERY_SPI_ENABLED
Enables the Discovery SPI lookup
|
static HazelcastProperty |
ClusterProperty.DISCOVERY_SPI_PUBLIC_IP_ENABLED
Enables the Discovery Joiner to use public IP from DiscoveredNode.
|
static HazelcastProperty |
ClusterProperty.ENABLE_JMX
Enable JMX agent.
|
static HazelcastProperty |
ClusterProperty.ENTERPRISE_LICENSE_KEY
Hazelcast IMDG Enterprise license key.
|
static HazelcastProperty |
ClusterProperty.EVENT_QUEUE_CAPACITY
The capacity of the
EventServiceImpl
executor. |
static HazelcastProperty |
ClusterProperty.EVENT_QUEUE_TIMEOUT_MILLIS
The timeout for offering an event to the event executor for processing.
|
static HazelcastProperty |
ClusterProperty.EVENT_SYNC_TIMEOUT_MILLIS
To prevent overloading of the outbound connections, once in a while an
event is made synchronous by wrapping it in a fake operation and waiting
for a fake response.
|
static HazelcastProperty |
ClusterProperty.EVENT_THREAD_COUNT
Number of threads for the
EventServiceImpl
executor. |
static HazelcastProperty |
ClusterProperty.FAIL_ON_INDETERMINATE_OPERATION_STATE
When this configuration is enabled, if an operation has sync backups and
acks are not received from backup replicas in time, or the member which
owns primary replica of the target partition leaves the cluster, then
the invocation fails with
IndeterminateOperationStateException . |
static HazelcastProperty |
ClusterProperty.GENERIC_OPERATION_THREAD_COUNT
The number of generic operation handler threads per member.
|
static HazelcastProperty |
ClusterProperty.GLOBAL_HD_INDEX_ENABLED
Enables use of the concurrent HD index introduced in 4.1 for the IMDG
predicate API (old query engine) and reverts to using the per-partition
indexes.
|
static HazelcastProperty |
ClusterProperty.GRACEFUL_SHUTDOWN_MAX_WAIT
Maximum wait in seconds during graceful shutdown.
|
static HazelcastProperty |
ClusterProperty.HEALTH_MONITORING_DELAY_SECONDS
Health monitoring logging interval in seconds.
|
static HazelcastProperty |
ClusterProperty.HEALTH_MONITORING_LEVEL
Health monitoring log level.
|
static HazelcastProperty |
ClusterProperty.HEALTH_MONITORING_THRESHOLD_CPU_PERCENTAGE
When the health monitoring level is SILENT, logs are printed only when
the CPU usage exceeds this threshold.
|
static HazelcastProperty |
ClusterProperty.HEALTH_MONITORING_THRESHOLD_MEMORY_PERCENTAGE
When the health monitoring level is SILENT, logs are printed only when the
memory usage exceeds this threshold.
|
static HazelcastProperty |
ClusterProperty.HEARTBEAT_FAILURE_DETECTOR_TYPE
Heartbeat failure detector type.
|
static HazelcastProperty |
ClusterProperty.HEARTBEAT_INTERVAL_SECONDS
The interval at which member heartbeat messages are sent
|
static HazelcastProperty |
ClusterProperty.INDEX_COPY_BEHAVIOR
Type of Query Index result copying behavior.
|
static HazelcastProperty |
ClusterProperty.INIT_CLUSTER_VERSION
Override cluster version to use while node is not yet member of a cluster.
|
static HazelcastProperty |
ClusterProperty.INITIAL_MIN_CLUSTER_SIZE
Initial expected cluster size to wait before member to start completely.
|
static HazelcastProperty |
ClusterProperty.INITIAL_WAIT_SECONDS
Initial time in seconds to wait before member to start completely.
|
static HazelcastProperty |
ClusterProperty.INVOCATION_MAX_RETRY_COUNT
Maximum number of retries for an invocation.
|
static HazelcastProperty |
ClusterProperty.INVOCATION_RETRY_PAUSE
Pause time between each retry cycle of an invocation in milliseconds.
|
static HazelcastProperty |
ClusterProperty.IO_BALANCER_INTERVAL_SECONDS
The interval in seconds between
IOBalancer
executions. |
static HazelcastProperty |
ClusterProperty.IO_INPUT_THREAD_COUNT
Controls the number of socket input threads.
|
static HazelcastProperty |
ClusterProperty.IO_OUTPUT_THREAD_COUNT
Controls the number of socket output threads.
|
static HazelcastProperty |
ClusterProperty.IO_THREAD_COUNT
The number of threads doing socket input and the number of threads doing
socket output.
|
static HazelcastProperty |
ClusterProperty.IO_WRITE_THROUGH_ENABLED
Optimization that allows sending of packets over the network to be done
on the calling thread if the conditions are right.
|
static HazelcastProperty |
ClusterProperty.JCACHE_PROVIDER_TYPE
Forces the JCache provider, which can have values client or server, to
force the provider type.
|
static HazelcastProperty |
ClusterProperty.JET_IDLE_COOPERATIVE_MAX_MICROSECONDS
The maximum time in microseconds the cooperative worker threads will
sleep if none of the tasklets made any progress.
|
static HazelcastProperty |
ClusterProperty.JET_IDLE_COOPERATIVE_MIN_MICROSECONDS
The minimum time in microseconds the cooperative worker threads will
sleep if none of the tasklets made any progress.
|
static HazelcastProperty |
ClusterProperty.JET_IDLE_NONCOOPERATIVE_MAX_MICROSECONDS
The maximum time in microseconds the non-cooperative worker threads will
sleep if none of the tasklets made any progress.
|
static HazelcastProperty |
ClusterProperty.JET_IDLE_NONCOOPERATIVE_MIN_MICROSECONDS
The minimum time in microseconds the non-cooperative worker threads will
sleep if none of the tasklets made any progress.
|
static HazelcastProperty |
ClusterProperty.JMX_UPDATE_INTERVAL_SECONDS
Some JMX MBeans are cached (e.g.
|
static HazelcastProperty |
ClusterProperty.JOB_RESULTS_MAX_SIZE
Maximum number of job results to keep in the cluster, the oldest
results will be automatically deleted after this size is reached.
|
static HazelcastProperty |
ClusterProperty.JOB_RESULTS_TTL_SECONDS
Maximum number of time in seconds the job results will be kept in
the cluster.
|
static HazelcastProperty |
ClusterProperty.JOB_SCAN_PERIOD
Jet will periodically check for new jobs to start and perform cleanup of
unused resources.
|
static HazelcastProperty |
ClusterProperty.LOCK_MAX_LEASE_TIME_SECONDS
All locks which are acquired without an explicit lease time use this value
(in seconds) as the lease time.
|
static HazelcastProperty |
ClusterProperty.LOG_EMOJI_ENABLED
Controls whether cluster emojis can be used in log messages.
|
static HazelcastProperty |
ClusterProperty.LOGGING_ENABLE_DETAILS
Controls whether cluster name, ip and version should be included in all
log messages.
|
static HazelcastProperty |
ClusterProperty.LOGGING_TYPE
Name of logging framework type to send logging events.
|
static HazelcastProperty |
ClusterProperty.MAP_EVICTION_BATCH_SIZE
Maximum number of IMap entries Hazelcast will evict during a
single eviction cycle.
|
static HazelcastProperty |
ClusterProperty.MAP_EXPIRY_DELAY_SECONDS
You can use MAP_EXPIRY_DELAY_SECONDS to deal with some possible
edge cases, such as using EntryProcessor.
|
static HazelcastProperty |
ClusterProperty.MAP_INVALIDATION_MESSAGE_BATCH_ENABLED
Defines Near Cache invalidation event batch sending is enabled or not.
|
static HazelcastProperty |
ClusterProperty.MAP_INVALIDATION_MESSAGE_BATCH_FREQUENCY_SECONDS
Defines the Near Cache invalidation event batch sending frequency in seconds.
|
static HazelcastProperty |
ClusterProperty.MAP_INVALIDATION_MESSAGE_BATCH_SIZE
Defines the maximum number of Near Cache invalidation events to be drained
and sent to the event Near Cache in a batch.
|
static HazelcastProperty |
ClusterProperty.MAP_LOAD_CHUNK_SIZE
The maximum size of the key batch sent to the partition owners for value loading
and the maximum size of a key batch for which values are loaded in a single partition.
|
static HazelcastProperty |
ClusterProperty.MAP_REPLICA_SCHEDULED_TASK_DELAY_SECONDS
Scheduler delay for map tasks those are executed on backup members.
|
static HazelcastProperty |
ClusterProperty.MAP_WRITE_BEHIND_QUEUE_CAPACITY
Setting this capacity is valid if you set
writeCoalescing to false
(see MapStoreConfig.setWriteCoalescing(boolean) ). |
static HazelcastProperty |
ClusterProperty.MASTERSHIP_CLAIM_TIMEOUT_SECONDS
The timeout which defines when master candidate gives up waiting for
response to its mastership claim.
|
static HazelcastProperty |
ClusterProperty.MAX_JOIN_MERGE_TARGET_SECONDS
Split-brain merge timeout for a specific target.
|
static HazelcastProperty |
ClusterProperty.MAX_JOIN_SECONDS
Join timeout, maximum time to try to join before giving up.
|
static HazelcastProperty |
ClusterProperty.MAX_NO_HEARTBEAT_SECONDS
The timeout which defines when a cluster member is removed because it has
not sent any heartbeats.
|
static HazelcastProperty |
ClusterProperty.MAX_WAIT_SECONDS_BEFORE_JOIN
The maximum time that a newly-appointed master node waits before forming a
cluster.
|
static HazelcastProperty |
ClusterProperty.MC_EXECUTOR_THREAD_COUNT
The number of threads that the Management Center service has available
for processing operations sent from connected Management Center instance.
|
static HazelcastProperty |
ClusterProperty.MC_MAX_VISIBLE_SLOW_OPERATION_COUNT
Management Center maximum visible slow operations count.
|
static HazelcastProperty |
ClusterProperty.MEMBER_LIST_PUBLISH_INTERVAL_SECONDS
The interval at which the master sends the member lists are sent to other
non-master members.
|
static HazelcastProperty |
ClusterProperty.MERGE_FIRST_RUN_DELAY_SECONDS
The delay until the first run of the split-brain handler.
|
static HazelcastProperty |
ClusterProperty.MERGE_NEXT_RUN_DELAY_SECONDS
The interval between invocations of the split-brain handler.
|
static HazelcastProperty |
ClusterProperty.METRICS_COLLECTION_FREQUENCY
Sets the metrics collection frequency in seconds.
|
static HazelcastProperty |
ClusterProperty.METRICS_DATASTRUCTURES
Enables/disables collecting metrics from the distributed data structures.
|
static HazelcastProperty |
ClusterProperty.METRICS_DEBUG
Enables collecting debug metrics.
|
static HazelcastProperty |
ClusterProperty.METRICS_ENABLED
Enables/disables metrics collection altogether.
|
static HazelcastProperty |
ClusterProperty.METRICS_JMX_ENABLED
Enables/disables exposing metrics on JMX.
|
static HazelcastProperty |
ClusterProperty.METRICS_MC_ENABLED
Enables/disables collecting metrics for Management Center.
|
static HazelcastProperty |
ClusterProperty.METRICS_MC_RETENTION
Sets the duration in seconds for which the collected metrics are retained
and Management Center can consume them.
|
static HazelcastProperty |
ClusterProperty.MOBY_NAMING_ENABLED
Defines whether Moby Names should be used for instance name generating
when it is not provided by user.
|
static HazelcastProperty |
ClusterProperty.MULTICAST_GROUP
IP address of a multicast group.
|
static HazelcastProperty |
ClusterProperty.MULTICAST_SOCKET_SET_INTERFACE
Allows explicitly control if the
MulticastSocket.setInterface(java.net.InetAddress) method is called in
the Hazelcast multicast discovery service. |
static HazelcastProperty |
ClusterProperty.NETWORK_STATS_REFRESH_INTERVAL_SECONDS
The interval at which network stats (bytes sent and received) are
re-calculated and published.
|
static HazelcastProperty |
ClusterProperty.OPERATION_BACKUP_TIMEOUT_MILLIS
If an operation has backups, this property specifies how long the
invocation will wait for acks from the backup replicas.
|
static HazelcastProperty |
ClusterProperty.OPERATION_CALL_TIMEOUT_MILLIS
Timeout to wait for a response when a remote call is sent, in milliseconds.
|
static HazelcastProperty |
ClusterProperty.PARTIAL_MEMBER_DISCONNECTION_RESOLUTION_ALGORITHM_TIMEOUT_SECONDS
The partial member disconnection resolution mechanism uses a graph algorithm
that finds a max-clique in non-polynomial time.
|
static HazelcastProperty |
ClusterProperty.PARTIAL_MEMBER_DISCONNECTION_RESOLUTION_HEARTBEAT_COUNT
The master member, i.e, the first member in the cluster member list
administrates the cluster and kicks unreachable members with the heartbeat
mechanism.
|
static HazelcastProperty |
ClusterProperty.PARTITION_BACKUP_SYNC_INTERVAL
Interval for syncing backup replicas in seconds.
|
static HazelcastProperty |
ClusterProperty.PARTITION_CHUNKED_MAX_MIGRATING_DATA_IN_MB
Total size of all chunks in bytes during a single partition migration.
|
static HazelcastProperty |
ClusterProperty.PARTITION_CHUNKED_MIGRATION_ENABLED
Enable to subdivide fragments into chunks.
|
static HazelcastProperty |
ClusterProperty.PARTITION_COUNT
Total number of partitions in the Hazelcast cluster.
|
static HazelcastProperty |
ClusterProperty.PARTITION_FRAGMENTED_MIGRATION_ENABLED
When enabled, which is the default behavior, partitions are migrated/replicated
in small fragments instead of one big chunk.
|
static HazelcastProperty |
ClusterProperty.PARTITION_MAX_PARALLEL_MIGRATIONS
Maximum number of partition migrations to be executed concurrently on a member.
|
static HazelcastProperty |
ClusterProperty.PARTITION_MAX_PARALLEL_REPLICATIONS
Maximum number of anti-entropy partition replications to be executed on a member.
|
static HazelcastProperty |
ClusterProperty.PARTITION_MIGRATION_INTERVAL
Time in seconds to sleep after a migration task.
|
static HazelcastProperty |
ClusterProperty.PARTITION_MIGRATION_TIMEOUT
Timeout in seconds for all migration operations.
|
static HazelcastProperty |
ClusterProperty.PARTITION_OPERATION_THREAD_COUNT
The number of partition operation handler threads per member.
|
static HazelcastProperty |
ClusterProperty.PARTITION_TABLE_SEND_INTERVAL
Interval for publishing partition table periodically to all cluster members
in seconds.
|
static HazelcastProperty |
ClusterProperty.PARTITIONING_STRATEGY_CLASS
Class name implementing
PartitioningStrategy , which
defines key to partition mapping. |
static HazelcastProperty |
ClusterProperty.PHONE_HOME_ENABLED
Enable or disable the sending of phone home data to Hazelcast’s phone home
server.
|
static HazelcastProperty |
ClusterProperty.PREFER_IPv4_STACK
Prefer IPv4 network interface when picking a local address.
|
static HazelcastProperty |
ClusterProperty.PRIORITY_GENERIC_OPERATION_THREAD_COUNT
The number of priority generic operation handler threads per member.
|
static HazelcastProperty |
ClusterProperty.PROCESSOR_CUSTOM_LIB_DIR
The directory containing jars, that can be used to specify custom classpath for
a stage in a pipeline.
|
static HazelcastProperty |
ClusterProperty.QUERY_MAX_LOCAL_PARTITION_LIMIT_FOR_PRE_CHECK
Maximum value of local partitions to trigger local pre-check for
Predicates.alwaysTrue() predicate query operations on maps. |
static HazelcastProperty |
ClusterProperty.QUERY_OPTIMIZER_TYPE
Type of Query Optimizer.
|
static HazelcastProperty |
ClusterProperty.QUERY_PREDICATE_PARALLEL_EVALUATION
Run Query Evaluations for multiple partitions in parallel.
|
static HazelcastProperty |
ClusterProperty.QUERY_RESULT_SIZE_LIMIT
Result size limit for query operations on maps.
|
static HazelcastProperty |
ClusterProperty.RESPONSE_THREAD_COUNT
The number of threads that process responses.
|
static HazelcastProperty |
ClusterProperty.SEARCH_DYNAMIC_CONFIG_FIRST
By default, search for data structures config is performed within static
configuration first:
Exact match in static config
Wildcard match in static config
Exact match in dynamic config
Wildcard match in dynamic config
Fallback to default
But sometimes it makes sense to perform search within dynamic configs
first.
|
static HazelcastProperty |
ClusterProperty.SECURITY_RECOMMENDATIONS
When set to any not-
null value, security recommendations are logged on INFO level during the node start. |
static HazelcastProperty |
ClusterProperty.SERIALIZATION_VERSION
Hazelcast serialization version.
|
static HazelcastProperty |
ClusterProperty.SHUTDOWNHOOK_ENABLED
Enable Hazelcast shutdownhook thread.
|
static HazelcastProperty |
ClusterProperty.SHUTDOWNHOOK_POLICY
Behaviour when JVM is about to exit while Hazelcast instance is still running.
|
static HazelcastProperty |
ClusterProperty.SLOW_OPERATION_DETECTOR_ENABLED
Enables or disables the
SlowOperationDetector . |
static HazelcastProperty |
ClusterProperty.SLOW_OPERATION_DETECTOR_LOG_PURGE_INTERVAL_SECONDS
Purge interval for slow operation logs.
|
static HazelcastProperty |
ClusterProperty.SLOW_OPERATION_DETECTOR_LOG_RETENTION_SECONDS
This value defines the retention time of invocations in slow operation logs.
|
static HazelcastProperty |
ClusterProperty.SLOW_OPERATION_DETECTOR_STACK_TRACE_LOGGING_ENABLED
Defines if the stacktraces of slow operations are logged in the log file.
|
static HazelcastProperty |
ClusterProperty.SLOW_OPERATION_DETECTOR_THRESHOLD_MILLIS
Defines a threshold above which a running operation in
OperationService
is considered to be slow. |
static HazelcastProperty |
ClusterProperty.SOCKET_BIND_ANY
Bind both server-socket and client-sockets to any local interface.
|
static HazelcastProperty |
ClusterProperty.SOCKET_BUFFER_DIRECT
If the bytebuffers used in the socket should be a direct bytebuffer (
true )
or a regular bytebuffer (false ). |
static HazelcastProperty |
ClusterProperty.SOCKET_CLIENT_BIND
Bind client socket to an interface when connecting to a remote server
socket.
|
static HazelcastProperty |
ClusterProperty.SOCKET_CLIENT_BIND_ANY
Bind client-sockets to any local interface.
|
static HazelcastProperty |
ClusterProperty.SOCKET_CLIENT_BUFFER_DIRECT
If the bytebuffers used in the socket should be a direct bytebuffer (
true )
or a regular bytebuffer (false ). |
static HazelcastProperty |
ClusterProperty.SOCKET_CLIENT_RECEIVE_BUFFER_SIZE
Overrides receive buffer size for connections opened by clients.
|
static HazelcastProperty |
ClusterProperty.SOCKET_CLIENT_SEND_BUFFER_SIZE
Overrides send buffer size for connections opened by clients.
|
static HazelcastProperty |
ClusterProperty.SOCKET_CONNECT_TIMEOUT_SECONDS
Socket connection timeout in seconds.
|
static HazelcastProperty |
ClusterProperty.SOCKET_KEEP_ALIVE
Socket set keep alive (SO_KEEPALIVE).
|
static HazelcastProperty |
ClusterProperty.SOCKET_LINGER_SECONDS
Set socket SO_LINGER option.
|
static HazelcastProperty |
ClusterProperty.SOCKET_NO_DELAY
Socket set TCP no delay.
|
static HazelcastProperty |
ClusterProperty.SOCKET_RECEIVE_BUFFER_SIZE
Socket receive buffer (SO_RCVBUF) size in KB.
|
static HazelcastProperty |
ClusterProperty.SOCKET_SEND_BUFFER_SIZE
Socket send buffer (SO_SNDBUF) size in KB.
|
static HazelcastProperty |
ClusterProperty.SOCKET_SERVER_BIND_ANY
Bind server-socket to any local interface.
|
static HazelcastProperty |
ClusterProperty.TCP_JOIN_PORT_TRY_COUNT
The number of incremental ports, starting with port number defined in
network configuration, that will be used to connect to a host which is
defined without a port in the TCP-IP member list while a node is searching
for a cluster.
|
static HazelcastProperty |
ClusterProperty.WAIT_SECONDS_BEFORE_JOIN
The time that a newly-appointed master node waits before forming a cluster.
|
static HazelcastProperty |
ClusterProperty.WAN_CONSUMER_ACK_DELAY_BACKOFF_INIT_MS
Defines the initial backoff delay for the Enterprise WAN
implementation's consumer.
|
static HazelcastProperty |
ClusterProperty.WAN_CONSUMER_ACK_DELAY_BACKOFF_MAX_MS
Defines the maximum backoff delay for the Enterprise WAN
implementation's consumer.
|
static HazelcastProperty |
ClusterProperty.WAN_CONSUMER_ACK_DELAY_BACKOFF_MULTIPLIER
Defines the multiplier (the speed of the function) for the backoff
delay for the Enterprise WAN implementation's consumer.
|
static HazelcastProperty |
ClusterProperty.WAN_CONSUMER_INVOCATION_THRESHOLD
Defines the pending invocation threshold for the Enterprise WAN
replication implementation.
|
Modifier and Type | Method and Description |
---|---|
HazelcastProperty |
HazelcastProperty.getParent()
Returns the parent
ClusterProperty of the property. |
HazelcastProperty |
HazelcastProperty.setDeprecatedName(String deprecatedName)
Sets the deprecated name of ths property.
|
Modifier and Type | Method and Description |
---|---|
boolean |
HazelcastProperties.containsKey(HazelcastProperty property)
Returns true if value for given key is provided (either as a HazelcastProperty or a System property).
|
boolean |
HazelcastProperties.getBoolean(HazelcastProperty property)
Returns the configured boolean value of a
HazelcastProperty . |
double |
HazelcastProperties.getDouble(HazelcastProperty property)
Returns the configured double value of a
HazelcastProperty . |
<E extends Enum> |
HazelcastProperties.getEnum(HazelcastProperty property,
Class<E> enumClazz)
Returns the configured enum value of a
ClusterProperty . |
float |
HazelcastProperties.getFloat(HazelcastProperty property)
Returns the configured float value of a
HazelcastProperty . |
int |
HazelcastProperties.getInteger(HazelcastProperty property)
Returns the configured int value of a
HazelcastProperty . |
long |
HazelcastProperties.getLong(HazelcastProperty property)
Returns the configured long value of a
HazelcastProperty . |
long |
HazelcastProperties.getMillis(HazelcastProperty property)
Returns the configured value of a
HazelcastProperty converted to milliseconds. |
long |
HazelcastProperties.getNanos(HazelcastProperty property)
Returns the configured value of a
HazelcastProperty converted to nanoseconds. |
long |
HazelcastProperties.getPositiveMillisOrDefault(HazelcastProperty property)
Returns the configured value of a
HazelcastProperty converted to milliseconds if
it is positive, otherwise returns its default value. |
long |
HazelcastProperties.getPositiveMillisOrDefault(HazelcastProperty property,
long defaultValue)
Returns the configured value of a
HazelcastProperty converted to milliseconds if
it is positive, otherwise returns the passed default value. |
int |
HazelcastProperties.getSeconds(HazelcastProperty property)
Returns the configured value of a
HazelcastProperty converted to seconds. |
String |
HazelcastProperties.getString(HazelcastProperty property)
Returns the configured value of a
HazelcastProperty as String. |
Constructor and Description |
---|
HazelcastProperty(String name,
HazelcastProperty property) |
HazelcastProperty(String name,
String defaultValue,
TimeUnit timeUnit,
HazelcastProperty parent) |
Copyright © 2022 Hazelcast, Inc.. All rights reserved.