Operation (hazelcast-jet-all 0.6.1 API)

java.lang.Object
- com.hazelcast.spi.Operation

All Implemented Interfaces:

DataSerializable

Direct Known Subclasses:

AbstractAtomicLongOperation, AbstractAtomicReferenceOperation, AbstractCRDTReplicationOperation, AbstractLocalOperation, AbstractLockOperation, com.hazelcast.spi.impl.AbstractNamedOperation, AbstractPNCounterOperation, AtomicLongReplicationOperation, AtomicReferenceReplicationOperation, CountDownLatchReplicationOperation, LockReplicationOperation, SemaphoreReplicationOperation
```
public abstract class Operation
extends Object
implements DataSerializable
```
An operation could be compared to a Runnable. It contains logic that is going to be executed; this logic will be placed in the run() method.

Field Summary

Fields
Modifier and Type Field and Description

static int GENERIC_PARTITION_ID
Marks an Operation as non-partition-specific.

Fields
Modifier and Type	Field and Description
`static int`	`GENERIC_PARTITION_ID` Marks an `Operation` as non-partition-specific.

Constructor Summary

Constructors
Modifier Constructor and Description

protected Operation()

Constructors
Modifier	Constructor and Description
`protected`	`Operation()`

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`void`	`afterRun()`
`void`	`beforeRun()`
`CallStatus`	`call()` Call the operation and returns the CallStatus.
`boolean`	`executedLocally()` Returns `true` if local member is the caller.
`Address`	`getCallerAddress()`
`String`	`getCallerUuid()`
`long`	`getCallId()` Gets the call ID of this operation.
`long`	`getCallTimeout()` Gets the call timeout in milliseconds.
`Connection`	`getConnection()`
`long`	`getInvocationTime()` Gets the time in milliseconds since this invocation started.
`protected ILogger`	`getLogger()`
`NodeEngine`	`getNodeEngine()`
`OperationResponseHandler`	`getOperationResponseHandler()` Gets the `OperationResponseHandler` tied to this Operation.
`int`	`getPartitionId()` Returns the ID of the partition that this Operation will be executed upon.
`int`	`getReplicaIndex()`
`Object`	`getResponse()` Called if and only if `returnsResponse()` returned `true`, shortly after `run()` returns.
`<T> T`	`getService()`
`String`	`getServiceName()`
`long`	`getWaitTimeout()` Returns the wait timeout in millis.
`boolean`	`isUrgent()`
`void`	`logError(Throwable e)` Logs `Exception`/`Error` thrown during operation execution.
`void`	`onExecutionFailure(Throwable e)` Called when an `Exception`/`Error` is thrown during operation execution.
`ExceptionAction`	`onInvocationException(Throwable throwable)` Called when an `Exception`/`Error` is thrown during an invocation.
`protected void`	`onSetCallId(long callId)` Called every time a new `callId` is set on the operation.
`void`	`readData(ObjectDataInput in)` Reads fields from the input stream
`protected void`	`readInternal(ObjectDataInput in)`
`boolean`	`returnsResponse()` Method is intended to be subclassed.
`void`	`run()`
`void`	`sendResponse(Object value)`
`Operation`	`setCallerUuid(String callerUuid)`
`Operation`	`setNodeEngine(NodeEngine nodeEngine)`
`Operation`	`setOperationResponseHandler(OperationResponseHandler responseHandler)` Sets the `OperationResponseHandler`.
`Operation`	`setPartitionId(int partitionId)` Sets the partition ID.
`Operation`	`setReplicaIndex(int replicaIndex)`
`Operation`	`setService(Object service)`
`Operation`	`setServiceName(String serviceName)`
`Operation`	`setValidateTarget(boolean validateTarget)`
`void`	`setWaitTimeout(long timeout)` Sets the wait timeout in millis.
`String`	`toString()`
`protected void`	`toString(StringBuilder sb)` A template method allows for additional information to be passed into the `toString()` method.
`boolean`	`validatesTarget()`
`void`	`writeData(ObjectDataOutput out)` Writes object fields to output stream
`protected void`	`writeInternal(ObjectDataOutput out)`

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

- Field Detail
  - GENERIC_PARTITION_ID
```
public static final int GENERIC_PARTITION_ID
```
    Marks an Operation as non-partition-specific.
    
    See Also:
    
    Constant Field Values
- Constructor Detail
  - Operation
```
protected Operation()
```
- Method Detail
  - executedLocally
```
public boolean executedLocally()
```
    Returns true if local member is the caller.
    Note: On the caller member this method always returns true. It's meant to be used on target member to determine if the execution is local.
  - isUrgent
```
public boolean isUrgent()
```
  - beforeRun
```
public void beforeRun()
               throws Exception
```
    Throws:
    
    Exception
  - run
```
public void run()
         throws Exception
```
    Throws:
    
    Exception
  - call
```
public CallStatus call()
                throws Exception
```
    Call the operation and returns the CallStatus. An Operation should either implement call or run; not both. If run is implemented, then the system remains backwards compatible to prevent making massive code changes while adding this feature. In the future all run() methods will be replaced by call methods. The call method looks very much like the run() method and it is very close to Runnable.run() and Callable.call(). The main difference between a run and call, is that the returned CallStatus from the call can tell something about the actual execution. For example it could tell that some waiting is required in case of a BlockingOperation. Or that the actual execution the work is offloaded to some executor in case of an Offloadable EntryOperation. In the future new types of CallStatus are expected to be added, e.g. for interleaving. In the future it is very likely that for regular Operation that want to return a concrete response, the actual response can be returned directly. In this case we'll change the return type to Object to prevent forcing the response to be wrapped in a CallStatus.DONE_RESPONSE monad since that would force additional litter to be created.
    
    Returns:
    
    the CallStatus.
    
    Throws:
    
    Exception - if something failed while executing 'call'.
  - afterRun
```
public void afterRun()
              throws Exception
```
    Throws:
    
    Exception
  - returnsResponse
```
public boolean returnsResponse()
```
    Method is intended to be subclassed. If it returns true, getResponse() will be called right after run() method. If it returns false, sendResponse(Object) must be called later to finish the operation.
    In other words, true is for synchronous operation and false is for asynchronous one.
    Default implementation is synchronous operation (true).
  - getResponse
```
public Object getResponse()
```
    Called if and only if returnsResponse() returned true, shortly after run() returns.
  - getServiceName
```
public String getServiceName()
```
  - setServiceName
```
public final Operation setServiceName(String serviceName)
```
  - getPartitionId
```
public final int getPartitionId()
```
    Returns the ID of the partition that this Operation will be executed upon. If the partitionId is equal or larger than 0, it means that it is tied to a specific partition: for example, a map.get('foo'). If it is smaller than 0, than it means that it isn't bound to a particular partition. The partitionId should never be equal or larger than the total number of partitions. For example, if there are 271 partitions, the maximum partition ID is 270. The partitionId is used by the OperationService to figure out which member owns a specific partition, and to send the operation to that member.
    
    Returns:
    
    the ID of the partition.
    
    See Also:
    
    setPartitionId(int)
  - setPartitionId
```
public final Operation setPartitionId(int partitionId)
```
    Sets the partition ID.
    
    Parameters:
    
    partitionId - the ID of the partition.
    
    Returns:
    
    the updated Operation.
    
    See Also:
    
    getPartitionId()
  - getReplicaIndex
```
public final int getReplicaIndex()
```
  - setReplicaIndex
```
public final Operation setReplicaIndex(int replicaIndex)
```
  - getCallId
```
public final long getCallId()
```
    Gets the call ID of this operation. The call ID is used to associate the invocation of an operation on a remote system with the response from the execution of that operation.
    - Initially the call ID is zero.
    - When an Invocation of the operation is created, call ID is assigned a positive value.
    - When the invocation ends, the operation is deactivate()d, but the call ID is preserved.
    - The same operation may be involved in a further invocation (retrying); this will assign a new call ID and reactivate the operation.
    Returns:
    
    the call ID
  - onSetCallId
```
protected void onSetCallId(long callId)
```
    Called every time a new callId is set on the operation. A new callId is set before initial invocation and before every invocation retry.
    By default this is a no-op method. Operation implementations which want to get notified on callId changes can override it.
    For example an operation can distinguish the first invocation and invocation retries by keeping the initial callId.
    
    Parameters:
    
    callId - the new call ID that was set on the operation
  - validatesTarget
```
public boolean validatesTarget()
```
  - setValidateTarget
```
public final Operation setValidateTarget(boolean validateTarget)
```
  - getNodeEngine
```
public final NodeEngine getNodeEngine()
```
  - setNodeEngine
```
public final Operation setNodeEngine(NodeEngine nodeEngine)
```
  - getService
```
public final <T> T getService()
```
  - setService
```
public final Operation setService(Object service)
```
  - getCallerAddress
```
public final Address getCallerAddress()
```
  - getConnection
```
public final Connection getConnection()
```
  - getOperationResponseHandler
```
public final OperationResponseHandler getOperationResponseHandler()
```
    Gets the OperationResponseHandler tied to this Operation. The returned value can be null.
    
    Returns:
    
    the OperationResponseHandler
  - setOperationResponseHandler
```
public final Operation setOperationResponseHandler(OperationResponseHandler responseHandler)
```
    Sets the OperationResponseHandler. Value is allowed to be null.
    
    Parameters:
    
    responseHandler - the OperationResponseHandler to set.
    
    Returns:
    
    this instance.
  - sendResponse
```
public final void sendResponse(Object value)
```
  - getInvocationTime
```
public final long getInvocationTime()
```
    Gets the time in milliseconds since this invocation started. For more information, see ClusterClock.getClusterTime().
    
    Returns:
    
    the time of the invocation start.
  - getCallTimeout
```
public final long getCallTimeout()
```
    Gets the call timeout in milliseconds. For example, if a call should start execution within 60 seconds otherwise it should be aborted, then the call-timeout is 60000 milliseconds. Once an operation starts execution and runs for a long period (e.g. 5 minutes with an IExecutorService execute operation), then the call timeout isn't relevant any longer. For more information about the default value, see GroupProperty.OPERATION_CALL_TIMEOUT_MILLIS
    
    Returns:
    
    the call timeout in milliseconds.
    
    See Also:
    
    setCallTimeout(long), OperationAccessor.setCallTimeout(Operation, long)
  - getWaitTimeout
```
public final long getWaitTimeout()
```
    Returns the wait timeout in millis. -1 means infinite wait, and 0 means no waiting at all. The wait timeout is the amount of time a BlockingOperation is allowed to parked in the OperationParker. Examples:
    1. in case of ILock.tryLock(10, ms), the wait timeout is 10 ms
    2. in case of ILock.lock(), the wait timeout is -1
    3. in case of ILock.tryLock(), the wait timeout is 0.
    The waitTimeout only has meaning for blocking operations. For non blocking operations the value is undefined.
    Returns:
    
    the wait timeout.
  - setWaitTimeout
```
public final void setWaitTimeout(long timeout)
```
    Sets the wait timeout in millis.
    
    Parameters:
    
    timeout - the wait timeout.
    
    See Also:
    
    for more detail.
  - onInvocationException
```
public ExceptionAction onInvocationException(Throwable throwable)
```
    Called when an Exception/Error is thrown during an invocation. Invocation process will continue, retry or fail according to returned ExceptionAction result.
    This method is called on caller side of the invocation.
    
    Parameters:
    
    throwable - Exception/Error thrown during invocation
    
    Returns:
    
    ExceptionAction
  - getCallerUuid
```
public String getCallerUuid()
```
  - setCallerUuid
```
public Operation setCallerUuid(String callerUuid)
```
  - getLogger
```
protected final ILogger getLogger()
```
  - onExecutionFailure
```
public void onExecutionFailure(Throwable e)
```
    Called when an Exception/Error is thrown during operation execution.
    By default this method does nothing. Operation implementations can override this behaviour due to their needs.
    This method is called on node & thread that's executing the operation.
    
    Parameters:
    
    e - Exception/Error thrown during operation execution
  - logError
```
public void logError(Throwable e)
```
    Logs Exception/Error thrown during operation execution. Operation implementations can override this behaviour due to their needs.
    This method is called on node & thread that's executing the operation.
    
    Parameters:
    
    e - Exception/Error thrown during operation execution
  - writeData
```
public final void writeData(ObjectDataOutput out)
                     throws IOException
```
    Description copied from interface: DataSerializable
    
    Writes object fields to output stream
    
    Specified by:
    
    writeData in interface DataSerializable
    
    Parameters:
    
    out - output
    
    Throws:
    
    IOException - if an I/O error occurs. In particular, an IOException may be thrown if the output stream has been closed.
  - readData
```
public final void readData(ObjectDataInput in)
                    throws IOException
```
    Description copied from interface: DataSerializable
    
    Reads fields from the input stream
    
    Specified by:
    
    readData in interface DataSerializable
    
    Parameters:
    
    in - input
    
    Throws:
    
    IOException - if an I/O error occurs. In particular, an IOException may be thrown if the input stream has been closed.
  - writeInternal
```
protected void writeInternal(ObjectDataOutput out)
                      throws IOException
```
    Throws:
    
    IOException
  - readInternal
```
protected void readInternal(ObjectDataInput in)
                     throws IOException
```
    Throws:
    
    IOException
  - toString
```
protected void toString(StringBuilder sb)
```
    A template method allows for additional information to be passed into the toString() method. So an Operation subclass can override this method and add additional debugging content. The default implementation does nothing so one is not forced to provide an empty implementation. It is a good practice always to call the super.toString(stringBuffer) when implementing this method to make sure that the super class can inject content if needed.
    
    Parameters:
    
    sb - the StringBuilder to add the debug info to.
  - toString
```
public String toString()
```
    Overrides:
    
    toString in class Object

Class Operation

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

GENERIC_PARTITION_ID

Constructor Detail

Operation

Method Detail

executedLocally

isUrgent

beforeRun

run

call

afterRun

returnsResponse

getResponse

getServiceName

setServiceName

getPartitionId

setPartitionId

getReplicaIndex

setReplicaIndex

getCallId

onSetCallId

validatesTarget

setValidateTarget

getNodeEngine

setNodeEngine

getService

setService

getCallerAddress

getConnection

getOperationResponseHandler

setOperationResponseHandler

sendResponse

getInvocationTime

getCallTimeout

getWaitTimeout

setWaitTimeout

onInvocationException

getCallerUuid

setCallerUuid

getLogger

onExecutionFailure

logError

writeData

readData

writeInternal

readInternal

toString

toString